Ken Wagnitz

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

Well I'm sorry that you find my comments unhelpful, Ken Gillett.  I think that is because you don't read them carefully enough. My last point was that a common headphones ground hasn't been seen by...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

Dave Yeager, the input socket isn't switched.  I looked at putting a switched socket there, but judged it too invasive WRT the PCB. My mod has a 3.5mm socket hanging off a lead out of the clamp, wi...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

I've received mine also, thanks Sena.My first thought was that the microphone lead is heading in the wrong direction.  I'll see if it's an issue. I plan to attach the new clamp to my wife's helmet,...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

Perhaps I was a bit harsh, Ken Gillett.  The potential danger is to others when they read misleading comments and take them as fact.At the risk of boring everyone with what is dragging out a bit he...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

"It appears that they have done nothing about the problem of common ground on earbuds and associated stereo/interference issues"There you go again Ken Gillett, peddling misinformation. Who says it ...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

For those handy with a soldering iron...waggies.net/Ken/Sena/ The content may get 'improved', but I'll keep the link alive.

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

Christian, the optimum amplifier output impedance for speakers, headphones etc, is 0 ohms.  This gives the maximum damping, ie reduces the cone's spurious vibrations or tendancy to resonate. I find...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

1. Yes, sometimes I use earbuds, sometimes helmet speakers. 2. No I do not uninstall the speakers when using earbuds.  That would be too tedious.  The earbuds I use (Etymotic) don't stick out too f...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

No sorry, it was Steve Z who added a socket to the bottom of the clamp.  He sent me a photograph of it.  I thought he'd put it on this forum too.

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

I also used a wired version of the microphone.  (My Nolan helmet has a hole at the front where I can place the mic.)   But my wife uses the boom version, with her Nolan flip helmet. I echo the sent...