Tim Snyder
- Activité totale 34
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 1
- Abonnements 8
Commentaires
Activité récente par Tim Snyder-
Version 1.0.3 seems to have fixed the Bluetooth Intercom ON/OFF, ON/OFF, ON/OFF - FAIL problem. I updated both units. I'm able to toggle the Bluetooth Intercom many, many times without failure. The...
-
I have VOX Intercom disabled. I don't know it that applies to Bluetooth Intercom only or not, but I suspect it does. You can toggle mesh mode on and off by pressing the mesh button ( on top under t...
-
I put in a ticket for the issue that communication stops when I turn off my bike, which is connected as Phone 1. True to form, the first response from Sena was "do a fault reset." This is infuriati...
-
Phil, I totally agree. The 30K is not usable as it is currently programmed. I have had the same problems with Bluetooth communication not toggling properly. I think the record is 3 times toggling b...
-
Tom, if you are not using the intercom, you'll be OK. If you use the intercom, you'll run into the issues exposed here. Don't count on Sena to fix problems quickly. They can take years to fix issue...
-
Nick, We haven't used the CB in awhile, but I believe it still works. I took out the CB headset once we got the Freewire working. There are only the Sena speakers in the helmet. I don't have any ex...
-
I found the source of the problem and solution. See my comment in Questions - 20S
-
So I found the source of the problem and the mic-to-Freewire-to-CB is now working. He's what I found was the problem. I have 2 headsets in the helmet - the Sena Headset and a standard, wired headse...
-
Yes, I got a replacement cable with the new Freewire. I was careful to plug it into the Freewire all the way. Yes, the microphone works. We've had the pair of 20S units for a couple of years. We we...
-
The mic to Freewire to Harley has never worked for me. I'm on the second Freewire. It's encouraging that it worked for you at one point. I see Sena hasn't responded to your post and the have not be...