SENA SMH5 enable to lock the duplex-modus
Dear Sir or Madame,
we are owners of a dual pack of SENA SMH5 headsets.
Everything is working fine, except the following problem:
If we use the headsets in “duplex-modus” for intercom between our both headsets, it is just enough to accidentally touch or press the “jog dial/wheel” very short and only with very little power to disconnect our “paired and connected” headsets.This needs at least "one free hand" to do a quick push on one of the jog dial/wheel again, to geht back to the duplex intercom mode.
So I ask You kindly for a firmware update, which enables a “locking” of the “paired and connected modus” of our two headsets to stay in the comfortable “duplex modus” of intercom, even when pressing the toggle wheel short.
Additional explanation: We use our both SMH5 headsets on our watersport-helmets during sailing, where you have many chances to accidentally touch the toggle-wheel with any part of the sailboat.
-
Bumping happens all the time for me also.. maybe a 2 second delay ( Hold of the jog button) to shut of intercom?
0
Accedi per aggiungere un commento.
Commenti
1 commento