10C - FEATURE NEED: SETTING FOR DEFAULT POWER-UP CAMERA MODE
The way the 10c operates right now, the default power up camera state/mode is OFF.
I use the camera EVERY time i ride for safety and to record if anything happens during my short commute.
As it stand now, EVERY TIME i turn the 10c on, i have to THEN:
1.) Turn on the camera
2.) HOLD the camera button for SEVERAL SECONDS to enable tagging mode
3.) HOLD camera button for more seconds to START tagging.
EVERY TIME i get on the bike. Three or more times a day. This gets old, tiring, and i worry it will wear out the button. It seems unnecessary in this modern era. I suggest making the device SMARTER in eh following manner.
Make a setting, accessible through the App, and the settings menu voice prompts in the 10c, for the desired power up CAMERA STATE of the 10c.
NEW SETTING:
Default POWER-UP states:
1.) Camera OFF (DEFAULT),
2.) Camera ON (not RECORDING),
3.) Camera ON (RECORDING),
4.) Camera ON (TAGGING MODE ready -- not TAGGING)
5.) Camera ON (TAGGING MODE READY and TAGGING immediately)
Thanks for considering.