Sena 10U aka SC1A speakers replacement by HD
Hello all, I have new SC1A and Schuberth C4 Pro and the quality of the sound is poor. Previous helmet C3 was with Interphone's hifi audio set. I cannot live without that good sound.
Inside the C4 there are just two 30mm (32ohm) speakers and the place inside is up to 40mm diameter available. I'm not sure about using Koss because 60ohm (I have one old). My question is, can I re-solder it to Sena's HD (what type A or B) with 40mm diameter and same impedance 32ohm ? (I cannot find specs of HD speakers). Will this work ? Or any recommendations for other speakers to improve audio quality of music please ? Thanks a lot.
Thank you.
-
I answer by myself after the discussion with local distributor - the speakers that could fit are for 50S/R, 40mm diameter and 32ohm impedance.
0 -
OK the speakers are @ home now it depends on my lazy time to try implement the change :) I will report later.
0 -
After consulting with a local distributor, I've concluded that the only speakers that would work would be 50S/R, 40mm in diameter, and 32ohm in impedance. basketball stars
0 -
thanks
0 -
OK
0 -
the speakers that could fit are for 50S/R, 40mm diameter and 32ohm impedance. LaptopsAkku
0
Accedi per aggiungere un commento.
Commenti
6 commenti