Double battery on SMH10R
We all know that the battery capacity is lower than the smh10 battery. So i am wondering is Sena can make a battery with a larger capacity or make a double cable to connect 2 batterys (parrallel) to increase the battery lifetime
-
If I bought this I would mount the battery in the front next to the mic. The battery on the back of the helmet with the wire hanging out is ugly.
0 -
Installation of the batterie on a BMW système 6 helmet is outside at the back. And only a short length of wire can be seen. However, charging the battery means taking the helmet at night instead of leaving it in the top-case as I used to do. Isn't it possible to have a waterproof connection just besides the battery? That would allow to unplug it and take it off its holder, allowing to have only this small part to take away for charging.That would be very convenient. Anybody tried that solution with a self made cable? Ready to try it if I knew of a tiny waterproof connector. 0 -
Phone is able to charge on ANY charger I've given it so far: usb/computer, Garmin chargers, and a slew of other 12v car adapters. The only problem is the Sena 12v car adapters. They only work on the SMH10s and NONE of my other devices like طاولة بلوت. I agree with your conclusion that they're putting out a very low amperage - just enough for the SMH10 and my other usb devices need more. Too bad they can't be used globally, like all the other adapters I've tried.
0
Accedi per aggiungere un commento.
Commenti
3 commenti