mic selection

Daniel van den Vlekkert

19 novembre 2015 20:58

In the manual for this device it is stated that the factory default is the internal mic (section 3.6).

Does the device recall the set state or does it reset to factory when it is powered on?

Regards,

Daniël van den Vlekkert

 

 

 

the manual:

3.6 Using Internal/External

Microphone

Users may use either the built-in microphone

of the Bluetooth Mic (internal microphone)

or the microphone of a connected pair of

headphones (external microphone). According

to the application, you may use either one by

using the switching operation. Press the (-)

Button for 3 seconds and then the mode will be

switched to the one for internal microphone or

external microphone. (factory default: internal

microphone)

 

0

• 

  Sena

  20 novembre 2015 00:17

  If you perform a Factory Reset has been performed then the device will revert to using the internal microphone. Otherwise it will continue to use an external microphone after switching to an external microphone even if you have powered off the device.

  0

Accedi per aggiungere un commento.