Pairing 2 SMH10's, and 20s's
I have 2 friends that have SMH10's and my close friend and myself have 20s's.
our 20s's are already paird.
I was able to get 1 20S to pair with the smh10, and when that was done, we were all able to talk to each other without problem, untill, about 20 min later (and this happed a few times) that the SMH10 sounded like a robot talking, and they said they heard the same from us, but the 2 20s's sounded fine still We turn them off and back on , and it worked.
should I also pair my headset to both of the smh10's? or is there something else wrong?
thank you
-
Related closely to this situation.
As 20S/10S has a little bit different features... this could be even the reason for "robot" voice.
Our 10S are new, 20S appr. 2 years old. Latest firmware.
10S has such a feature, that pushing "connect" button appr. 2sec, it will open "group communication". Which opens a line to all paired units, 20S as well.
But group communication in 20S has been made in a way, it accepts only 20S units to the group?
This question might be for more for the developers... but why there isn't such a simple feature built in to the 20S, it would open group communication in a simple similar way as 10S does (to all paired units)?
Or is there?
0
Accedi per aggiungere un commento.
Commenti
1 commento