Adjustable Microphone Transmit Audio Level Setting on the Ver 2 SMH-10. Ver 1 was perfect!

Commenti

12 commenti

  • Dan Heming
    Dan Heming

    I currently have 2 Yeasu FTM-10SR radio's for my motorcycle & my wife's and one of them has the optional Yaesu BT BU-1chip.  The other one we have recently purchased the SR10 to use with the other radio, but at this time are still waiting for the open ended cord to be released so I can make my own plug to connect to the FTM-10SR.  My wife and I are currently very happy Scala Q2 users going on 3 years, but when its time to upgrade we were seriously looking at the Sena SMH10 headsets, but I have heard numerous complaints like this one of the audio being too loud with the SMH-10 v2 on the Ham radio's we use and others.  We could find ver 1 SMH10's on the used market, but then that would keep us from upgrading as new firmware is released and I've been pretty impressed with Sena's updates along the way.  I have been following Lu Venci closely on the FTM-10R / SR threads as he has the setup I want to go to, but at this time I'm holding off until the issues he is having are resolved.  Please do address this issue and allow the sound to be returned to where the V1 was if so desired by the user for devices that have enough amplification in them already. 

    Dan Heming

    Newnan, GA

    0
  • Ronald Gerhold
    Ronald Gerhold

    Hello friend 

     I have a Yeasu FTM-10r ham radio with Bluetooth. I was looking for a headset for my motorcycle. I was looking at the Scala Rider G4. My friend suggested that I get the sena SMH-10 

    instead of the scala rider g4 . well the Sena ver2 play's very hot  and about to go out of the band pass. out of frequency. I have a Yeasu  Bluetooth headset  BH-2a and it plays great , not hot at all. 

    Please give us a way to adjust the Mic output . So I can use my headset I can't afford to through away $200.00 Dollars .

        At this point I am sorry I didn't  got the Scala rider G4.  

    Yours Truly 

    Ronald Gerhold

    k4GET

    0
  • Marc Woo
    Marc Woo

    Thank you for your feedbacks. We will try to find out the way how to resolve the case in the next firmware release. Will get back to you when ready. Also, the DIY cable is coming in mid January.

    0
  • Lu Vencl
    Lu Vencl

    I might add that for those using the SR10, you will find some relief with the latest firmware I just loaded.. I will test tonight, but at least there is that option to turn down or up the radio TX audio level.

    This will help those ONLY with the SR-10.

    0
  • Lu Vencl
    Lu Vencl

    Dear Sena,

    Any word on when we might expect the next release that will contain the selectable mic audio gain? Thanks

    KA4EPS

    0
  • Lu Vencl
    Lu Vencl

    Dan, Any update on this fix?

    0
  • Ronald Gerhold
    Ronald Gerhold

    Well there is a firmware update for the SMH-10-B from firmware 3.2 to 3.3 dated December 2011 however it still has no fix for the over hot microphone.

    An adjustment for the mic gain is what we asked for. I guess the management from Sena do not take us seriously. 

    Please Fix this problem . Or should we tell the motorcycle clubs and  Motorcycle magazines of this problem with the product .

    Ronald Gerhold K4GET

    0
  • J M H
    J M H

    Adjustable mic gain would be a great improvement. Sometimes it difficult to hear my wife with via the intercom connection due to her speaking softly. If I could increase the intercom mic gain on her SMH10, there would be no issue.

    0
  • Marc Woo
    Marc Woo

    Thank you for your suggestion. We will investigate the background noise to the caller when using SR10. The reasons of occurring the kind of noise are rather complicated that it is difficult to say that lowering mic gain would be the proper solution. We will let you clarified soon why the problems are being occurred. And we expect it will be improved in the next firmware version. 

    0
  • Lu Vencl
    Lu Vencl

    Any word on the "planned" fix in the next release for the adjustable mic gain on the SMH 10?  Just a recap, I need lower levels just like the Ver 1 had. It has been since November now since I have brought this up and well my patience is starting to question the progress.  An update I believe might be in order now. If the plans have been scrubbed, I need to know that now so I can move forward with another solution. Thanks in advance.

    0
  • Marc Woo
    Marc Woo

    We have performed feasibility test for mic gain configuration; however, the function significantly affects others since it is quite tricky to find an optimal gain applicable to phone and intercom.

    It means if you adjust the Intercom mic gain to certain level, then iPhone Siri or voice command may not work. Definitely, we will try to find a solution anyway and it is to be realized in v4.1.

     

    Thank you for your patience.

    0
  • Stu Bond
    Stu Bond

    Dear Sena,

    Was there a solution to background noise setting off intercom tx  in V4?  I am still trying to download 4.1 and my machine stalls at 12%.

    Stu

    0

Accedi per aggiungere un commento.