Feedback for SMH10 4.3 Beta SW
Hi guys,
Installed ver 4.3rc1 today, I'm yet to try that but already a little feedback.
When assigning speed dial phone numbers via SW-manager, the phone number fields are limited to numbers only, should allow also + sign 'cause otherwise international calling would be cumbersome. Say, if I'm abroad I cannot call anyone. I did not try if format '00<Country code><phone number>' would work, but if it did, should be mentioned in the user instructions.
Secondly, I'm not certain if it is possible but why not use phone speed-dials here instead of full numbers.
In other word by selecting speed dial #6 from SMH10 the phone would call to whatever number is stored onto it's speed-dial position #6
-
Hi Guys
Glad some one is getting further than me. I have tried unsuccessfully to upgrade to Firmware Version 4.3 Beta even though I followed all the steps as per your email.
- I had registered my product previously so didn't have do this.
- I have read the disclaimer and understand that there is no support for the Beta version.
- I downloaded the Beta Firmware v4.3, 64 bit.
- I downloaded the new Sena Device Manager V1.4.2 for windows.
- I wiped the Sena units of all pairing by resetting them to factory settings.
- Followed instructions on Sena Device Manager to update firmware on Sena Units but without success. See attached screen shots in word file. Note that the Sena Device Manager is indicating that firmware v4.2.1 is installed rather than the v4.3 which I had selected.
- Tried to use the Sena units as per the "SMH10 v4.3 Beta Firmware Notes" just in case the firmware upgrade was successful but to no avail.
I am confident I have followed all instructions correctly but I am no computer whiz so I may be missing something. I have tried to upgrade the firmware 6 or 7 times without success.
Does anyone have any thoughts on what I might be doing wrong?
Cheers
Gavin
v4.3 Firmware Upgrade Screenshots.docx0 -
have you tried de-installing old Sena Device manager and then install new Sena Device Manager & use that for update.
0 -
I tried all the steps above to update to 4.3, when I tried to download 4.3, getting an error prompt saying "The selected disc image file isn't valid" Do I really have to burn a CD just to download this ? when I loaded 4.2 last year - it was pretty straight forward.
0 -
Hi Sepi
Tried uninstalling old device manager and installing new version but no different to my previous attempts. Do you have any other ideas?
Cheers
Gavin
0 -
Just to make you guys feel worse... I downloaded 4.3 and installed it without any hiccups at all.
Just got on to find a user manual cos I'm about to set it up to go on a ride, but can't find one. (I use an SM10 with a CB to keep in touch with the other Ulysses club riders.)
0 -
My upgrade also went well. The issue I have is that with the new firmware I appear to have lost the added volume from the 4.2 release. I now have to turn my Goldwing radio all the way up to hear it when on the hiway :)
0
Accedi per aggiungere un commento.
Commenti
6 commenti