Hi,

desired functionality of above equipment:
me, with 10U & Freewire (stereo & GPS audio wired in) with
VOX intercom/bike2bike to my partner's SC10U on her motorcycle.
All Sena (and Schuberth) components received the latest firmware via PC Device Manager...
No phones paired, no GPS paired (mine has a wired audio out)
Should be a simple thing, right? After all we write the year 2024...
The idea was to turn your headsets on so they reconnect automatically, ignition on so Freewire powers up and reconnects, go ride...
I have my tunes and GPS audio, if required we talk via the VOX operated intercom, whilst the audio mutes, stop talking and the tunes fade back in... simple, right? Wrong!!!

Turns out this basic, everyday functionality is not possible...

My 10U reconnects automatically to the Freewire upon powering on, check...
(pretty much the only thing that works, to a degree though...)

Intercom pairing between 10U & SC10U is not restored after powering down any of the two headset and turning them on again; fault! Why?!!
Pairing of intercom drops the prev pairing of Freewire; fault! Why?!!
Pairing Freewire again while intercom is active, will cancel intercom pairing; fault! Why?!!

The quick start guides included are pretty useless, but so are the full "manuals" I've downloaded; obviously written by marketing folks, but not by people who actually use those gadgets on a daily base...

Tried all kinds of settings, either via PC Device Manager or with the phone apps (note that the proprietary Schuberth kit requires its own software's there, despite it being made by Sena...), but no avail...
No automatic establishing if intercom, not possible to keep two pairings active on the 10U...

So, I tried A, B, C and D... what else can I try to make this work as required??

cheers
M. Brunner
Vienna, Austria (Europe)