sena sc2: automatic power off when remote is powered off
Please add a feature that when the remote of the sc2 is powered off with the power off button, that the main unit is also powered off. I dont know any reason nor any other device that behaves that end-user-unfriendly. It is clear that it often happens that someone forgets to turn off either the remote or the main unit which leads to a dead battery. I would not care that much if sena would follow the EU guidelines regarding batteries (they must be easily replaceable), unfortunately sena does not. That means, the battery is dead then.
Another nice feature would be: if there is no connection from the remote to the main unit, power off the main unit after about e.g. 10 minutes or so.
Bitte fügt das Feature hinzu, dass wenn die Fernbedienung vom SC2 deaktiviert wurde via power button, dass die Haupteinheit ebenfalls ausgeschaltet wird. Ich kenne keinen Grund oder anderes Gerät, das sich so Endbenutzer-unfreundlich verhält. Ist ja logisch, dass es oft passiert, dass vergessen wird entweder die remote oder die Haupteinheit auszuschalten, was letztlich zu einer toten Batterie führt. Wäre auch nicht weiter wild, wenn SENA sich an die EU-Richtlinien halten würde betreffend tauschbarer Akkus (die müssen einfach ersetzbar sein). Leider tut das Sena nicht. Das bedeutet, die Batterie ist dann tot.
Ein anderes nettes Feature wäre: wenn es keine Verbindung von der Fernbedienung zur Haupteinheit gibt, dass sich die Haupteinheit nach 10 Minuten oderso abschaltet.
-
It is clear that it often happens that someone forgets to turn off either the remote or the main unit which leads to a dead battery. Bradford Locksmith I would not care that much if sena would follow the EU guidelines regarding batteries (they must be easily replaceable), unfortunately sena does not.
0 -
Very informative post! I like how the Sena SC2 manages power automatically by turning off with the remote. This saves energy and makes riding much simpler. Thanks for sharing such useful details! Luiz Antonio Duarte Ferreira
0 -
Great suggestion! I completely agree—having the main unit shut off automatically when the remote’s powered down would prevent those frustrating, battery-draining oversights. And the idea of a 10-minute auto-shutdown if the connection drops is smart, too. These small enhancements could make the SC2 dramatically more user-friendly and battery-efficient. Nice work! Daniel Dantas
0 -
The suggestion is to add an auto power-off feature to the Sena SC2. If the remote is turned off or disconnected for about 10 minutes, the main unit should shut down automatically. This prevents battery drain and ensures the device is ready when needed.Sidney De Queiroz Pedrosa
0
Accedi per aggiungere un commento.
Commenti
4 commenti