Sena 30k Firmware Update to v3.4 Error 7 Cannot get status update
-
If you're experiencing "Error 7: Cannot get status update" while updating your Sena 30K firmware to v3.4, it could be due to a few reasons. Here’s what you can do:
1. **Check Connection**: Ensure your Sena 30K is properly connected to the computer or smartphone you're using for the update. A loose connection can interrupt the update process.
2. **Restart Devices**: Restart both your Sena 30K and the device you're using for the update. Sometimes, a simple reboot can resolve update issues.
3. **Update Software**: Make sure you have the latest version of the Sena Device Manager or the Sena smartphone app. An outdated application can cause update errors.
4. **Use a Different Port or Cable**: Try using a different USB port or cable to rule out hardware issues.
5. **Try Again**: Sometimes, the update process might fail due to temporary issues. Attempt the update again after following the above steps.
If these steps don’t resolve the issue, contact Sena customer support for further assistance. They can provide specific troubleshooting steps or help with possible firmware issues. regarding Mp3juice 20
0 -
If you're encountering an Error 7 during the Sena 30k firmware update to v3.4 and cannot get a status update, consider checking the troubleshooting steps for firmware issues. In similar situations, the Sagi true story illustrates how attention to detail and methodical problem-solving can often resolve complex technical issues. Applying a similar approach may help you find a solution to your firmware update problem.
0 -
I am having the same issue. I have changed USB ports, leads, uninstalled the device manager and then reinstalled and updated several times and I have even tried a different computer that successfully updated another 30K but still no luck. I have emailed Sena Support and went through it all again and now I think they may have given up on me as I haven't heard from them in days. In amongst all of this I have updated the firmware on two 20s evo's and a 20s with no problems. Has anyone got any ideas?????????????
0 -
If you're encountering "Error 7: Cannot get status update" when trying to update the firmware on your Sena 30K to version 3.4, it could be due to a few common issues. First, ensure that the Sena 30K is properly connected to your computer via a USB cable and that the device is powered on during the update process. Double-check that you are using the latest version of the Sena Device Manager software. Restart your computer and try a different USB port, as connection stability can sometimes be the issue. If the problem persists aethersx2apk, performing a factory reset on the Sena 30K or contacting Sena support may resolve the issue.
0 -
Nothing helps. As a consumer, we're fucked, because Sena doesn't seem to gave a good fuck.
0 -
Hi,
Having read all the posts to try to find a solution on how to update my Sena30K with Sena Device Manager from my Windows 10 laptop via USB were I got all the above mentioned errors. "Cannot get status [1] [7] and [9] with some others as well..
I had a brand new 30K lying and mounting it on my new paragliding helmet, I connected it for a firmware update from original one, without luck.
I will copy/paste this into the other threads I found as well.
My solution have worked on other USB accessories with driver issues as well. I have a older Windows 7 pc and installed the latest version of the Sena Device Manager, then did the firmware update on the SENA without any problems.
NOW version 3.4 is installed on my 30K, AND i can communicate with the SENA from my Windows 10 laptop as well.
Hope this can be of any help.0
Accedi per aggiungere un commento.
Commenti
6 commenti