using the device manager for mac to update the firmware on a 10S and will recognize the device but will not connect to server. using original 10S Sena 90 degree USB cable. frustrating. ideas?
4 commenti
-
James Wonder I am also having this issue, any fix?
-
Ken Kimari Using the most current device manager? They often update this when new firmware comes out
-
Coachlinnea Different model but same issue.
I am trying to check my SC10U (Schuberth 10U model) and also cannot get it to connect through the most current version of Device Manager on my Mac.
-
Ken Kimari This was from Sena on a previous post regarding the 10U model. Hope this helps.
Sena MarketingMay 30, 2017 10:36The 10U for the Schuberth C3/C3 Pro and the SC10U are two different products.
The firmware updates for these products are specific to those models of headsets so updates for the 10U for Schuberth C3/C3 Pro cannot be installed onto the SC10U and vice versa.
Firmware updates for SC10U need to be installed using the Schuberth Device Manager that has been supplied to Schuberth here: http://oemsena.com/oem-schuberth/. They cannot be installed using the Sena Device Manager that can be downloaded from sena.com.