10C Pro problems
We have had the 10C Pro for about a month, and finally took our it for a weekend ride. We have some good videos, but it has some problems...
We immediately found that the 10C Pro had NO sound through the speakers! I was using a 20S. and wife had the 10C Pro. I could hear her... she could not hear me on the 10C Pro.
After some fiddling with the 10C Pro, we found that you cannot have the speaker cable plugged into the 10C until AFTER the 10C has been powered 'on'. Very weird!
Next problem.... LOTS of static through the comm.
We typically used our 20S with open comms, and rarely had any static through the comms. When we connected the 10C Pro.... LOTs of static ;-(
We found that it gets even worse when the 10C Pro user pairs and listens to music and then talks via comm to the other 20S rider. Wow, talk about static, I could barely understand what she was saying!!! Then she turns off the music and most of the static subsides, but still some static. At least I could hear what she was saying.
What is the problem Sena?
Yes, we have updated to the newest firmware and on our weekend ride, we reset the 10C Pro a few times (didn't do anything).
Is this a problem with all 10C Pro or just mine?
Accedi per aggiungere un commento.