I turned on my sena today and noticed I had sound on one of the speakers only. I turned it off and reconnected the speaker and mic connector turned the sena back on and had no sound at all. On the video recordings the mic audio can be heard but very low. any ideas? I rolled back the firmware to 2.1 and same results not audio at all.
Data
Voti
4 commenti
-
Mike Driscoll I have a similar situation. I've attempted to attach another set of speakers, do a full reset, revert to version 2.0 and use the 3.5 mm connector with no success. I called and opened up a ticket to RMA my headset.
-
beans Humberto,
What was the last thing you did with the 10C, before it lost sound in the speakers?
Try doing a factory reset and a fault reset, to see if it makes a difference.
-
Kerry Nadin One day I had sound, the next, none. Updated firmware, restored firmware, unplugged and switched on etc. still no sound.
-
Kerry Nadin Also, according to the device manager, the latest firmware is V2.6 What is going on, are Sena not releasing updates to countries that are not the USA?
Accedi per aggiungere un commento.