Red Leader
- Attività totali 66
- Attività recente
- Membro dal
- Seguiti 0 utenti
- Seguito da 0 utenti
- Voti 9
- Abbonamenti 23
Panoramica attività
Ultima attività di Red Leader-
Red Leader ha commentato,
After any factory reset (through the menu) and any firmware changes, be sure to tap the reset button located above the info sticker (model, serial #) to the left of the screw, with a paperclip.
-
Red Leader ha commentato,
Oh that's nice they're making it metal now! Good to see that they're improving the design from feedback. I wonder if you could use a hot soldering iron with a small piece of abs or lego, melt a gob...
-
Red Leader ha commentato,
I'm pretty sure I recall it being different with the old firmware. In any case, we need that option for sure!
-
Red Leader ha commentato,
Susan, Have you tried connecting your iPhone to your Nav VI, then connect your Nav VI to your 20S? Not sure if the Nav VI will adjust the music when it gives directions but if it does, there's your...
-
Red Leader ha commentato,
That'a good point. You'd probably need France French, New Brunswick French, and Québec French options because they all sound really different.
-
Red Leader ha commentato,
It could be a poor connection between the Headset Main Unit (20S) and the Universal Helmet Clamp. Make sure the pins and connectors are clean and are in good contact. You can usually tell if the cr...
-
Red Leader ha commentato,
Drücken Sie die Reset-Taste. Zurück von 20S. Benutze die Nadel.
-
Red Leader ha commentato,
Try the SR10 coupled to a two-way radio - PIT guy has the two-way radio, the drivers have a SR10+two-way radio. Or, for one-way communication, equip all drivers with two-way radios plugged into the...
-
Red Leader ha commentato,
Try hitting the reset button - requires a thin paperclip or needle. See "Fault Reset" in your 20S manual for details. Other thing too is to check your 20S is firmly contacting the pins on your Uni...
-
Red Leader ha commentato,
After you do a firmware change, do the factory reset, AND then press that reset button (need a needle or thin paperclip) on the Headset Main Unit (see "Fault Reset" in the manual). Usually I'll ha...