Red Leader
- Attività totali 65
- Attività recente
- Membro dal
- Segue 0 utenti
- Seguito da 0 utenti
- Voti 9
- Abbonamenti 22
Commenti
Attività recente di Red Leader-
I think there is some confusion in the matter. From my experience with the 20S - 20S pairing, firmware v1.5, I find that...1. Practically speaking, Intercom Overlay Sensitivity Level (IOSL) is basi...
-
After any factory reset (through the menu) and any firmware changes, be sure to tap the reset button located above the info sticker (model, serial #) to the left of the screw, with a paperclip.
-
Oh that's nice they're making it metal now! Good to see that they're improving the design from feedback. I wonder if you could use a hot soldering iron with a small piece of abs or lego, melt a gob...
-
I'm pretty sure I recall it being different with the old firmware. In any case, we need that option for sure!
-
Susan, Have you tried connecting your iPhone to your Nav VI, then connect your Nav VI to your 20S? Not sure if the Nav VI will adjust the music when it gives directions but if it does, there's your...
-
That'a good point. You'd probably need France French, New Brunswick French, and Québec French options because they all sound really different.
-
Drücken Sie die Reset-Taste. Zurück von 20S. Benutze die Nadel.
-
Try the SR10 coupled to a two-way radio - PIT guy has the two-way radio, the drivers have a SR10+two-way radio. Or, for one-way communication, equip all drivers with two-way radios plugged into the...
-
Try hitting the reset button - requires a thin paperclip or needle. See "Fault Reset" in your 20S manual for details. Other thing too is to check your 20S is firmly contacting the pins on your Uni...
-
After you do a firmware change, do the factory reset, AND then press that reset button (need a needle or thin paperclip) on the Headset Main Unit (see "Fault Reset" in the manual). Usually I'll ha...