Ken Kimari
- Attività totali 578
- Attività recente
- Membro dal
- Segue 0 utenti
- Seguito da 0 utenti
- Voti 0
- Abbonamenti 185
Commenti
Voti sull’attività di Ken Kimari-
Remember reading about this in another thread. One of the posters had same problem. He updated firmware and problem resolved. It was posted Jan 2021
-
did you download the device manager from the LS2 website? https://oem.sena.com/ls2/#
-
Also, might try the other boom mic that came with the kit. if that solves the problem then it is the mic.
-
Wind deflector for microphones. Might try this but usually for noise cancelling microphones when you cover the outside (away from your face) it can defeat the noise cancelling function. http://www...
-
Make sure the microphone is facing the right way. There is a small lug on one side the microphone just below the foam cover that should point outwards from your face. If it points towards your fac...
-
On headset 2 also delete the pairing through the app.
-
Martin - I would clear the bluetooth pairing completely from both units completely rather than disabling the function so as to not accidentally engage it during a ride. Do a factory reset on both u...
-
Martin - I think you hit the nail on the head. The dual pack units such as the 20s are bluetooth paired out of the box and it is quite possible the 30k and 50r/s units in dual packs may also be se...
-
Hi Clay. If you turn on the audio multi-tasking initially from the app you need to turn the headset off then on again to activate it. It then will retain the audio multi-tasking feature. From th...
-
Maybe try this - new article : https://www.ikream.com/how-to-fix-bluetooth-that-is-not-working-on-your-iphone-after-ios-13-update-34020