Chris BeHanna
- Attività totali 28
- Attività recente
- Membro dal
- Segue 0 utenti
- Seguito da 0 utenti
- Voti 2
- Abbonamenti 8
Panoramica attività
Ultima attività di Chris BeHanna-
Chris BeHanna ha commentato,
I'd be happy just to get comparable range to the SMH10 that I replaced.
-
Chris BeHanna ha commentato,
A friend and I experienced even more poor performance out of our 20S units. We only got clear communication at a range of 50-60 meters (minimum following distance @ 60mph). We would start getting...
-
Chris BeHanna ha commentato,
Ken, Phone apps tend to use the A2DP profile to issue their sound. Your iPhone GPS app is going to mux with music in whatever way the app asks iOS to do so. This is not anything that SMH20S has u...
-
Chris BeHanna ha commentato,
Color me confused. My SMH10 is paired with my iPhone, my son's SMH10 is paired with his Note 3, and each SMH10 is paired with each other. On power-up, mine recognizes my iPhone, his recognizes his...
-
Chris BeHanna ha commentato,
This is certainly possible, if you daisy-chain the connections. 1 pairs to 2, 2 pairs to 3, 3 pairs to 4, 4 pairs to 5, 5 pairs to 6. 2 conferences in 1 and 3, 3 conferences in 2 and 4, 4 confe...
-
Chris BeHanna ha commentato,
My son used an iPod Touch with his Sena, and it worked quite well. We now both use 64GB iPhone 4S's, and they work fine, too. Siri even works, BUT, you have to turn off the passcode lock, as Siri...
-
Chris BeHanna ha commentato,
Ken, you can mix as you've suggested if you route the iPhone through an SR10, and then pair the SR10 with the SMH10. I don't do this, but I have had fabulous success running a Valentine One throug...
-
Chris BeHanna ha commentato,
The SMH10 pairs with the iPhone using all of the following profiles: HFP, A2DP, AVRCP. Phone traffic goes through HFP, whereas it appears that all other audio, including voice cues from your SatNa...
-
Chris BeHanna ha commentato,
The manager software doesn't work for me AT ALL (version 1.2, running on OS X Lion Server). I get to the screen that asks me for my password, enter it, and click OK, and I get red text above the p...
-
Chris BeHanna ha commentato,
Per the use manual for the SR10, it can share an HFP connection with another device. The SMH10 4.0 firmware, furthermore, allows for two HFP connections, so we're good.