beans
- Attività totali 124
- Attività recente
- Membro dal
- Segue 0 utenti
- Seguito da 0 utenti
- Voti 0
- Abbonamenti 52
Commenti
Attività recente di beans-
To the issue with not connecting "media audio", try the following: 1. Delete all the devices paired on your phone 2. Power cycle the phone. 3. Pair the phone with your Bluetooth intercom headset.
-
The Sena Smartphone App only works with the Sena 20S, 10S, 10C, 10U, and 10R. Compatibility: Requires iOS 7.0 or later. You should try to restart your iPhone. To restart your iPhone hold down the H...
-
First, if you are not yet registered, go here: http://www.sena.com/support/registration/ Then you need to download the sena firmware update software here: http://www.sena.com/device-manager-downloa...
-
The 665 uses HFP for it's nav directions. The A2DP is used for music. Garmin has a firmware update regarding their A2DP here: http://www8.garmin.com/support/download_details.jsp?id=5001 Change Hist...
-
Hi Aaronlunada, What kind of computer and SENA model you have? You might want to try this on another PC.
-
Hi Gordon, Do you have the 3.5mm audio cable plugged in all this time? If so, you may need to get a ground loop isolator for your 3.5mm cable. You're running in to a ground loop if both the ALP and...
-
What you should try is to temporarily remove the boom/wired microphone but leave the speakers connected to the 10C. Ride around or blow in the 10C body while recording a video. If you don't hear an...
-
I don't think you can really tell the difference in quality unless you're in a quiet environment. When you're out riding there's a lot of background noise to contend with.
-
If you have SMH10 headsets the iPhone is limited to playing music to only one Bluetooth headset.The SMH10 has a feature for sharing music. https://www.youtube.com/watch?v=GJ9iQwdq1vE
-
To David, The music volume has a separate volume setting. When you first power on the headset wait a few seconds (wait 2-3 seconds and DO NOT play any music) and lower the volume by turning the jog...