Josh F

1. Community
2. General Discussion
3. Bikom 20 vs M1 Evo / R1 Evo

There is a ".1" firmware update for the BiKom and helmets that seems to make things MUCH better FYI.

1. Community
2. General Discussion
3. Bikom 20 Mesh 3.0 is worse than 2.0

There is a ".1" firmware update for the BiKom and helmets that seems to make things MUCH better FYI.

1. Community
2. General Discussion
3. Bikom 20 Mesh 3.0 is worse than 2.0

Interesting. Can you tell me how to change it? I'm using the BiKom with the R1 Evo helmets and the quality is *terrible*. It's pretty much impossible to make out more than a few words at a time unl...

1. Community
2. General Discussion
3. Bikom 20 vs M1 Evo / R1 Evo

They do work together but you need to make sure and update the firmware on the helmets, the older firmware does *not* work. In theory any device that has "mesh intercom" listed as a feature works w...

1. Community
2. General Discussion
3. Pairing a Sena PI with a Sena +mesh universal

The Sena +Mesh is a separate adapter. If you want to pair a Pi with a Mesh Intercom device (like your R1 Evo) you first need to pair the Pi with a +Mesh and then add the +Mesh to your Mesh Intercom...

1. Community
2. Feature Requests and Suggestions
3. Driver shipped with Sena Device manager incompatible with Win11 Core isolation/ memory integrity feature

After removing the above, and restarting, I was able to enable Memory Integrity. I have no need to reinstall the Sena software for now.

1. Community
2. Feature Requests and Suggestions
3. Driver shipped with Sena Device manager incompatible with Win11 Core isolation/ memory integrity feature

I think that's the wrong app to remove actually. Under Installed Apps I see this:   I think that's the one to remove, will try it.

1. Community
2. Feature Requests and Suggestions
3. Driver shipped with Sena Device manager incompatible with Win11 Core isolation/ memory integrity feature

The above doesn't work. Even after uninstall and reboot the incompatible driver is still present.

1. Community
2. Tips & Troubleshooting
3. M1 Evo Won't Turn On, Firmware Update Loop

Support was able to get me straightened out. I had to do a fault reset (plug helmet in, insert paper clip) and then let it charge for 3 hours. I suspect I must have left the helmet on and drained i...

1. Community
2. Tips & Troubleshooting
3. M1 Evo Won't Turn On, Firmware Update Loop

Using device manager 4.4.0