Tom (masterX244)
- Gesamtaktivitäten 141
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 46
Kommentare
Neueste Aktivität von Tom (masterX244)-
Got it. https://github.com/masterX244/SenaLogGrabberdownload this as zip and then run the batch file. YOu need to enter the IP address that the impulse uses while in your home network. Do that righ...
-
No weird shenanigans with the versions at your case since you are on wifi-part 1.0. Trying to get a way to extract the logfile atm but that fails in a weird way on automating it
-
got to crossreference my research again to see if it is using the old or the new indexes (my impulse is "freezed" onto the old wifi-part firmware since i prevent it from reaching the real sena serv...
-
connect with your PC to the WiFi provided by the Impulse and then load following addresses and then post the output. that tells me the relevant versions (and yes, the app uses those addresses, too ...
-
there is something weird going on atm with the Impulse and its software versions... at work atm and no access to my research on the details of the update process and how the app communicates with t...
-
is the issue on downloading the file to your computer or on installing it onto the device? if it is withh downloading to your PC try here: https://archive.org/download/sena_firmware_files_SMH10 (...
-
I recently saw some RC versions floating around for tjhe Impulse in the first revision
-
Like Buddy Bear said the software on the WiFi dongle is crap. Use a regular USB cable (and not the adapter thingy) for updating. The Dongle software got a few more stupid bugs, too. (easy to spot o...
-
Got caught by the same issue initially. thats why i recognized it that quick.
-
you need to hold the button longer until it tells configuration menu, then you can go to phone pairing with the + and - buttons. the pairing without is the sena<-->sena pairing