Peter

1. Community
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Ken, I don't believe Sena is planning on anything other that what they have already delivered, the SC-A0103. Maybe at some point they'll make a version with bare leads instead of a cigarette lighte...

1. Community
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Ken, given that "Optional 12V bike-powered kit with on/off control by ignition switch" is one of the feature bullet points listed on the Sena web site for the SR10, I don't think it's reasonable to...

1. Community
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Ken, in my case the ham radio is connected to a bike mounted antenna and gets ground there even when running on its internal battery. The SR10 is also connected to a Valentine One radar detector wh...

1. Community
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Yeah, I understand how ground loops are formed. I also know about aftermarket isolators (and am currently using one between the radar detector and the SR10). The problem here is that those kind of ...

1. Community
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Hi Matt, I have the parts (including a set of Hirose connectors for a single cable connection to the SR10) but haven't had the time to put it together yet. When I have it finished I'll post the det...

1. Community
2. Feature Requests and Suggestions
3. SR10 PTT Reprogram?

If the radio's PTT button works during receive, and a different external PTT, like on a Speaker/Mic or headset also works during receive, then my guess is that you either have a bad cable between t...

1. Community
2. Feature Requests and Suggestions
3. SR10 PTT Reprogram?

Hi Rich, ok, I think I understand what you're talking about now. I read your original message as meaning that the repeater _never_ stops transmitting. Yes, my local repeaters to continue to transmi...

1. Community
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Hey Dan, I'm aware of the ground loop isolators with 3.5mm connectors. I have one for the radar detector but haven't installed it yet. My bigger issue is the two-way radio. I have a ground loop bet...