Remote Control Pairing

You can remotely control the headset using Sena Remote Control devices (sold separately).

To perform Remote Control Pairing on the SRL-Mesh:

1. Turn on the headset and the Remote Control device.

2. Execute Remote Control Pairing.

1. Access the Configuration Menu by Holding down the Center Button for 10 seconds.
2. Tap the (-) Button 4 times or until "Remote Control Pairing" is heard.
3. Tap the Center Button to execute Remote Control Pairing.

3. Enter pairing mode in the Remote Control device. The headset will automatically connect with the Remote Control device in pairing mode.