Configuration Setting

You can change the configuration settings of the headset through the
Sena Marine App or the Sena Device Manager.

Headset Language
You can select or change the device language, which will stay saved even if the headset is rebooted.

Mesh Reach-Out (Default: Disabled)
If the Mesh Reach-Out is disabled, a Mesh Reach-Out request message cannot be sent or received.

Mesh Intercom Vox Sensitivity (Default: 3)
The adjustable Mesh Intercom Vox Sensitivity activates voice transmission between 5 levels of voice sensitivity. The lower the sensitivity, the louder you need to speak.

Sidetone (Default: Disabled)
Sidetone is audible feedback from your voice and helps you naturally speak at the correct level based on the noise conditions of your surroundings. If this feature is enabled, you can hear what you are saying during an intercom conversation or a phone call.

Voice Prompt (Default: Enabled)
While some Voice Prompts may be disabled in the software configuration settings, the following voice prompts are always on:
- Battery level indicator
- Speed dial
- FM radio functions
- Mesh Intercom

RDS AF Setting (Default: Disabled)
A radio station with more than one frequency can be used by enabling the Radio Data System (RDS) Alternative Frequency (AF) Setting. This setting allows a receiver to re-tune to the second frequency location when the first signal becomes too weak.

FM Station Guide (Default: Enabled)
When FM Station Guide is enabled, FM station frequencies are given by voice prompts as you select preset stations.

Region Selection
When using the region setting, you can optimize the seek function to avoid unnecessary frequency ranges, allowing you to select the proper FM frequency range for your location.