Startup profiles
I recently purchased the 10C and overall I'm very happy with it. My bike is my day to day transport, and I used the 10C like a dash car, radio, & cell phone hands free, plus an intercom when I'm riding with my wife. That means that every time I get on my bike I have to turn on the unit, check the battery level check it's connected to my phone, turn on the camera, start the camera recording, and turn on the FM radio before I can move the bike.
I'd like to see an option added to the cellphone app that would let us set one (or more) startup profiles so that we could decide what we wanted our "default modes" to be and have it automatically set itself up every time it's powered on, same as when you start your car your radio comes onto the last settings, the dash cam automatically starts up, and the hands free automatically turns on.
-
10C - FEATURE NEED: SETTING FOR DEFAULT POWER-UP CAMERA MODE
The way the 10c operates right now, the default power up camera state/mode is OFF.
I use the camera EVERY time i ride for safety and to record if anything happens during my short commute.
As it stand now, EVERY TIME i turn the 10c on, i have to THEN:
1.) Turn on the camera
2.) HOLD the camera button for SEVERAL SECONDS to enable tagging mode
3.) HOLD camera button for more seconds to START tagging.EVERY TIME i get on the bike. Three or more times a day. This gets old, tiring, and i worry it will wear out the button. It seems unnecessary in this modern era. I suggest making the device SMARTER in eh following manner.
Make a setting, accessible through the App, and the settings menu voice prompts in the 10c, for the desired power up CAMERA STATE of the 10c.
NEW SETTING
Default POWER-UP CAMERA state (proposed settings):
1.) Camera OFF (DEFAULT),2.) Camera ON (not RECORDING),
3.) Camera ON (RECORDING),
4.) Camera ON (TAGGING MODE ready -- not TAGGING)
5.) Camera ON (TAGGING MODE READY and TAGGING immediately)
Thanks for considering.
0
Please sign in to leave a comment.
Comments
1 comment