2

10C - FEATURE NEED: SETTING FOR DEFAULT POWER-UP CAMERA MODE

10C - FEATURE NEED:  SETTING FOR DEFAULT POWER-UP CAMERA MODE

The way the 10c operates right now, the default power up camera state/mode is OFF.

I use the camera EVERY time i ride for safety and to record if anything happens during my short commute.

As it stand now, EVERY TIME i turn the 10c on, i have to THEN:

1.) Turn on the camera
2.) HOLD the camera button for SEVERAL SECONDS to enable tagging mode
3.) HOLD camera button for more seconds to START tagging.

EVERY TIME i get on the bike.  Three or more times a day.  This gets old, tiring, and i worry it will wear out the button.  It seems unnecessary in this modern era.  I suggest making the device SMARTER in eh following manner.

Make a setting, accessible through the App, and the settings menu voice prompts in the 10c, for the desired power up CAMERA STATE of the 10c.

NEW SETTING:

Default POWER-UP states:
 
1.) Camera OFF (DEFAULT),

2.) Camera ON (not RECORDING),

3.) Camera ON (RECORDING),

4.) Camera ON (TAGGING MODE ready -- not TAGGING)

5.) Camera ON (TAGGING MODE  READY and TAGGING immediately) 

Thanks for considering. 

0 comments

Please sign in to leave a comment.