Volume too high 50S
Hello
I have a problem on my sena 50S, when I am connected and I put music, despite the "music" volume in the Sena settings at minimum, the sound is very loud and if I increase it becomes impossible to listen ; I use the Deezer application and I don't know how to do it because everything is at a minimum.
Bonjour,
J'ai un problème sur mon sena 50S, lorsque je suis connecté et que je mets de la musique, malgré le volume "musique" dans les paramètres Sena au minimum, le son est très fort et si j'augmente ça devient impossible à écouter; j'utilise l'application Deezer et je ne sais pas comment faire car tout est au minimum.
-
Official comment
Hi there,
If you're experiencing audio volume issues during intercom use, it might be related to the Intercom-Audio Overlay Sensitivity setting. You can adjust this setting as follows:
1. Access your device settings, via motorcycle app or device manager.
2. Look for the "Intercom-Audio Overlay Sensitivity" option.
3. Adjust the sensitivity level as needed. Level 1 has the lowest sensitivity, while level 5 has the highest.This setting controls how the music, FM radio, and GPS volume behave when you talk over the intercom. Lower sensitivity levels will reduce the overlaid audio volume when you speak over the intercom. If your voice isn't louder than the selected sensitivity level, the overlaid audio won't be lowered.
If this issue isn't occurring during intercom use, I would recommend performing a fault reset to reset the hardware and then testing the audio again. Take a paper clip or something thin to press the fault reset button on the back of the device.
Once your 50S is paired with your phone, the jog dial should control the audio level on your phone, including lowering it as needed.Although I am not familiar with the Deezer app, but I wonder if it is an app setting you can check as well.
Please give this a try, and if you're still experiencing problems, feel free to reach out for further assistance.
Please sign in to leave a comment.
Comments
1 comment