Can the SMH10 get sound from an SR10 while the SMH10 is in 3 way intercom conference?
I know when you have an 3 or 4 way intercom conversation that you won't hear you will be disconnected from your bluetooth phone. But will you still be connected to an SR10. If I am in a 3 way intercom conversation and have my GPS connected to my SR10 via a wired connection, will I be able to hear the GPS turn notifications? Will it be mixed into the background of the 3 way intercom conversation? It says in V4 firmware that sounds from the SR10 will be heard in the background of an intercom conversation but doesn't mention 3 or 4 way.
If so, then I could connect my phone through the SR10 via bluetooth and my GPS via wired connection and get all the notifications while I am in a 3 or 4 way conversation.
-
The answer, based on my expreince with my setup, is no. What you describe works great when engaged in a two-way intercom caall, but not 3- or 4-way. My setup is V1 radar detector and zumo 660 plugged into SR10; SR10 and iPhone 4 paired to SMH10.
-dan
0 -
OK, thanks for the info. I was afraid that was the answer.
0 -
Conference intercom requires full utilization of Bluetooth bandwidth. To do so, SMH10 must disconnect from all other bluetooth devices to dedicate its bandwidth to conference intercom. Thus, no other bluetooth devices will be connected to SMH10 during the conference intercom session including SR10.
Please let me know if you have any additional questions.Thank you,
Dan Kim
Sena Technologies
Customer Support Engineer0 -
I also asked this question and got this answer. You may find it helpful.
QUESTION:
If you have the intercom connected to only one other person can you still hear anything from other devices? Like cell phones, GPS or the SR10? Can you hear a a2dp device or only hfp device?
ANSWER:
You can only hear certain HFP devices like phone and SR10. GPS cannot be heard since it produces unstable audio link if overlapped with intercom session.
0
Please sign in to leave a comment.
Comments
4 comments