iphone 5 and SHM10 v4.1
Hi,
I just received my new SHM10 and after pairing with my iPhone 5 I found that the audio playback via A2DP was very choppy.
The headset came with 4.1 firmware installed. I upgraded to v4.1.1 which didn't fix the problem - maybe even made it worse. So I downgraded to v4.0 which has fixed the problem.
I can't find any reports online of people having the same problem, so I'm wondering whether this is a known issue or whether there's something about my phone. It's running IOS v 6.0.1 (10A525).
I'm not sure what I'm missing by removing 4.1, but since I bought the unit primarily for playing music, I will stay on 4.0 until this problem is resolved.
Thanks,
Peter Whitfield
-
I have a similar problem with iphone 5s and firmware 4.2. From this thread: http://support.senabluetooth.com/entries/22063223-SMH10-bluetooth-problem
it seems like you could try the following: enable EDR instead of A2DP (from Sena Device Manager's Device Setting).
I'll give it a try asap, hopefully this will fix it
0 -
Iphone 6 is not pairing with SHM10 . What firmware corrects this ?
Tks
Fabio Duarte
0 -
Fabio,
If you have just updated your iphone OS, you may have to power cycle it. Current OS updates on the iphone has been an issue lately.
You should not have any issue with any version of the firmware on the SMH10. 5.1 is the current version and we have paired a iphone 6 with no problem. Make sure you factory reset the smh10 after a firmware update.
To pair the smh10, press and hold the "small" button (Phone button) for 5 seconds until the red and blue LED starts to flash.
0 -
If your SHM10 v4.1 doesn’t auto-reconnect, try resetting the Bluetooth pairing and updating the firmware. Some updates introduced auto-pairing, but manual reconnection may still be needed. Like anime world apk modernizes classics, optimizing your setup ensures seamless connectivity.
0
Please sign in to leave a comment.
Comments
4 comments