Ken Kimari
- Total activity 580
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 186
Comments
Recent activity by Ken Kimari-
If there is a HD speaker accessory switch on the app, make sure it is off. Audio boost then should be available. Is your firmware up to date? Current is 2.2.2
-
If your sena has the HD speakers, there is an HD speaker accessory switch below the audio boost switch that when selected on , greys out the audio boost. Leave the HD speaker accessory switch on an...
-
Do you really need mesh? If not would recommend 20s evo. Less expensive, easier to manage and way, way better battery life.
-
If in fact both units are paired, then a single tap of the jog dial will both connect and disconnect the intercom session. This pairing should remain remain even if both units are turned off.
-
Hi Hubert. For intercom pairing between the two hold the jog dial down on each unit for approx 5 seconds. You should hear "intercom pairing" through the speakers. Release the button and both uni...
-
There is a good youtube video on this. Google search SRL2 phone pairing and it should be the first match.
-
You may have to hold it a bit longer. 12 sec is approximate. You should hear the prompt. I would also check to see that your volume is up all the way.
-
Press and hold center button until you hear "configuration menu" through the speakers. Release then tap the + button and you should hear "phone pairing" through the speakers. You will then hear m...
-
What are you trying to pair? Your phone or the intercom?
-
you could do this if your car supports android auto or apple CarPlay. Connect the phone in your car and have the 20s connected to another phone. Simply call either phone and you have a two-way co...