Peter
- Total activity 38
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 11
Activity overview
Latest activity by Peter-
Peter commented,
Ken, I don't believe Sena is planning on anything other that what they have already delivered, the SC-A0103. Maybe at some point they'll make a version with bare leads instead of a cigarette lighte...
-
Peter commented,
Ken, given that "Optional 12V bike-powered kit with on/off control by ignition switch" is one of the feature bullet points listed on the Sena web site for the SR10, I don't think it's reasonable to...
-
Peter commented,
Ken, in my case the ham radio is connected to a bike mounted antenna and gets ground there even when running on its internal battery. The SR10 is also connected to a Valentine One radar detector wh...
-
Peter commented,
Yeah, I understand how ground loops are formed. I also know about aftermarket isolators (and am currently using one between the radar detector and the SR10). The problem here is that those kind of ...
-
Peter commented,
Hi Matt, I have the parts (including a set of Hirose connectors for a single cable connection to the SR10) but haven't had the time to put it together yet. When I have it finished I'll post the det...
-
Peter commented,
If the radio's PTT button works during receive, and a different external PTT, like on a Speaker/Mic or headset also works during receive, then my guess is that you either have a bad cable between t...
-
Peter commented,
Hi RIch, well, that's one difference in our setup, my SR10 isn't paired as either phone or media. I used the multipoint pairing for it (hold the jog wheel on the SMH10 until it says 'intercom pairi...
-
Peter commented,
Hey Dan, I'm aware of the ground loop isolators with 3.5mm connectors. I have one for the radar detector but haven't installed it yet. My bigger issue is the two-way radio. I have a ground loop bet...
-
Peter created a post,
Disable SR10 PTT when external PTT cable plugged in
When the SR10 is placed in a bag or mounted inside the bike fairings, it's common for other items to contact the large PTT button and trigger the two-way radio unintentionally. When there's an exte...
-
Peter created a post,
SR10 Needs Ground-Loop Isolation
When the SR10 is powered from the bike, and connected to audio devices that are also bike-powered, ground loops are formed between the devices and any electrical noise present on the bike's electri...