Robert Godoy

1. Motorcycles
2. 10C

“Scan” is the function that automatically searches station frequencies, starting from the current frequency and up. To use the scan function, please follow the procedures below: Double tap the P...

1. Motorcycles
2. 10C

You (A) can have a three-way conference intercom with two other 10C friends (B & C) by establishing two intercom connections simultaneously. While a three-way conference intercom is in progress, mo...

1. Motorcycles
2. 10C

You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversati...

1. Motorcycles
2. 10C

1. To restore the 10C to factory default settings, press and hold the Phone Button for 10 seconds until the LED shows solid red and you hear “Factory reset”. 2. Within 10 seconds, press the Jog Di...

1. Motorcycles
2. 10C

 If you cannot install the clamp unit on the helmet, you can use the glued surface mounting plate to attach the clamp unit to the surface of the helmet. Clean the area on the left side of the he...

1. Motorcycles
2. 30K

To erase all of your settings and start fresh, the headset can be restored to factory default settings using the Factory Reset feature.  

1. Motorcycles
2. 30K

1. To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep.    2. To adjust the volume, rotate the Jog Dial clockwise or counterclockwise.   3. To track forwar...

1. Motorcycles
2. 30K

1. Execute GPS Pairing by holding down the Jog Dial for 5 seconds. 2. Within 2 seconds, 3. Tap the Phone Button once to hear the voice prompt, “Second mobile phone pairing”. 4. Again within 2 se...

1. Motorcycles
2. 20S

"Scan" is the function that automatically searches station frequencies, starting from the current frequency and up. To use the scan function, please follow the procedures below: 1. Double tap the P...

1. Accessories
2. RC3

1. Turn on the 10C and the RC3. 2. Press the Jog Dial for 10 seconds to enter the configuration menu. Rotate the Jog Dial until you hear a voice prompt saying, "Remote control pairing". Press the P...