Robert Godoy

1. Motorcycles
2. 30K

To erase all of your settings and start fresh, the headset can be restored to factory default settings using the Factory Reset feature.  

1. Motorcycles
2. 30K

1. To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep.    2. To adjust the volume, rotate the Jog Dial clockwise or counterclockwise.   3. To track forwar...

1. Motorcycles
2. 30K

1. Execute GPS Pairing by holding down the Jog Dial for 5 seconds. 2. Within 2 seconds, 3. Tap the Phone Button once to hear the voice prompt, “Second mobile phone pairing”. 4. Again within 2 se...

1. Motorcycles
2. 20S

"Scan" is the function that automatically searches station frequencies, starting from the current frequency and up. To use the scan function, please follow the procedures below: 1. Double tap the P...

1. Accessories
2. RC3

1. Turn on the 10C and the RC3. 2. Press the Jog Dial for 10 seconds to enter the configuration menu. Rotate the Jog Dial until you hear a voice prompt saying, "Remote control pairing". Press the P...

1. Accessories
2. RC4

1. Turn on the 10C and the RC4. 2. Press the Jog Dial for 10 seconds to enter the configuration menu. Rotate the Jog Dial until you hear a voice prompt saying, "Remote control pairing". Press the P...

1. Motorcycles
2. 10C EVO

You can remotely control the headset using Sena Remote Control devices (sold separately). 1. Turn on the headset and the Remote Control device. 2. Execute Remote Control Pairing. 3. Enter pairin...

1. Motorcycles
2. 10C EVO

Multi-Way Intercom enables conference-call-style conversations with up to three intercom friends at the same time. While multi-way intercom is in progress, mobile phone connection is temporarily di...

1. Motorcycles
2. 10C EVO

You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversati...

1. Motorcycles
2. 10C EVO

Press and hold the Camera Button for 1 second to start video recording. The green LED will flash and you will hear a voice prompt, “Recording”. Press and hold the Camera Button for 1 second to stop...