Robert Godoy
- Total activity 206
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 139
Articles
Recent activity by Robert Godoy-
Pairing the RC4 (4-button remote) with a 10C
1. Turn on the 10C and the RC4. 2. Press the Jog Dial for 10 seconds to enter the configuration menu. Rotate the Jog Dial until you hear a voice prompt saying, "Remote control pairing". Press the P...
-
Remote Control Pairing
You can remotely control the headset using Sena Remote Control devices (sold separately). 1. Turn on the headset and the Remote Control device. 2. Execute Remote Control Pairing. 3. Enter pairin...
-
Multi-Way Intercom
Multi-Way Intercom enables conference-call-style conversations with up to three intercom friends at the same time. While multi-way intercom is in progress, mobile phone connection is temporarily di...
-
Music Sharing
You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversati...
-
Video Recording
Press and hold the Camera Button for 1 second to start video recording. The green LED will flash and you will hear a voice prompt, “Recording”. Press and hold the Camera Button for 1 second to stop...
-
Checking the Battery Level
LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30%
-
Seek and Save Radio Station
“Seek” is the function that searches for station to station frequencies. To use the “Seek” function, please follow the procedure below: Rotate while pressing the Jog Dial clockwise to search up ...
-
Group Intercom
Group Intercom allows you to instantly create a multi-way conference intercom with three other most recently paired headsets. 1. Go through intercom pairing with up to three headsets you want to h...
-
Remote Control
You can remotely control the 10C via Bluetooth using the Handlebar Remote (sold separately). This eliminates the need to take off your hand for button operations. Your 10C and the Handlebar Remote ...
-
Checking the Battery Level
You can check the battery level in two different ways when the headset is powering on. LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 ...