Robert Godoy
- Total activity 206
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 139
Articles
Recent activity by Robert Godoy-
Checking the Battery Level
LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30%
-
Seek and Save Radio Station
“Seek” is the function that searches for station to station frequencies. To use the “Seek” function, please follow the procedure below: Rotate while pressing the Jog Dial clockwise to search up ...
-
Group Intercom
Group Intercom allows you to instantly create a multi-way conference intercom with three other most recently paired headsets. 1. Go through intercom pairing with up to three headsets you want to h...
-
Remote Control
You can remotely control the 10C via Bluetooth using the Handlebar Remote (sold separately). This eliminates the need to take off your hand for button operations. Your 10C and the Handlebar Remote ...
-
Checking the Battery Level
You can check the battery level in two different ways when the headset is powering on. LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 ...
-
Installing the Speakers
Peel off each cover of the hook and loop fasteners for speakers to expose the adhesive surface. Then, attach the fasteners to the ear pockets inside the helmet. Attach the speakers to the hook a...
-
Fault Reset
When the SMH10 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the r...
-
Checking the Battery
You can check the battery level in two different ways when the headset is powering on. LED IndicatorWhen the headset is powering on, the red LED flashes rapidly indicating the battery level.4 flash...
-
Pairing the RC3 (3-button remote) with a 10R
1. Turn on the 10R and the RC3. 2. Press the Center Button for 10 seconds to enter the configuration menu. Tap the (+) Button or the (-) Button until you hear a voice prompt saying, "Remote control...
-
Pairing the RC4 (4-button remote) with a 10R
1. Turn on the 10R and the RC4. 2. Press the Center Button for 10 seconds to enter the configuration menu. Tap the (+) Button or the (-) Button until you hear a voice prompt saying, "Remote control...