Robert Godoy
- Total activity 206
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 139
Articles
Recent activity by Robert Godoy-
GPS Pairing
1. Press and hold the Jog Dial for 5 seconds until you will hear a voice prompt saying “Intercom pairing”. 2. Within 2 seconds, double tap the Phone Button and you will hear the voice prompt sayin...
-
Two-way Intercom
Starting Two-way Intercom You can start an intercom conversation with one of any intercom friends by tapping the Jog Dial: single tap to intercom with the first intercom friend, double tap to int...
-
Play Music
Bluetooth Stereo Music 1. To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep. 2. To adjust the volume, rotate the Jog Dial. 3. To track forward or track...
-
Camera Modes
Camera Modes
-
Charging
The headset can be charged using many common methods via the supplied USB power & data cable. The LED turns red while the headset is charging and turns blue when it is fully charged. Depending upon...
-
Scan and Save Radio Station
“Scan” is the function that automatically searches station frequencies, starting from the current frequency and up. To use the scan function, please follow the procedures below: Double tap the P...
-
Three-way Intercom
You (A) can have a three-way conference intercom with two other 10C friends (B & C) by establishing two intercom connections simultaneously. While a three-way conference intercom is in progress, mo...
-
Music Sharing
You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversati...
-
Factory Reset
1. To restore the 10C to factory default settings, press and hold the Phone Button for 10 seconds until the LED shows solid red and you hear “Factory reset”. 2. Within 10 seconds, press the Jog Di...
-
Using the Glued Surface Mounting Plate
If you cannot install the clamp unit on the helmet, you can use the glued surface mounting plate to attach the clamp unit to the surface of the helmet. Clean the area on the left side of the he...