Sena

1. Cycling & Outdoor
2. PRISM / PRISM LITE

  Here is how to install the Prism using the Helmet Clamp mount onto a helmet: 1. Attach the clamp kit to the side of the helmet. 2. Slide the screw plate onto the clamp kit. 3. Insert the ball jo...

1. Motorcycles
2. SMH10

1. Turn on the SMH10 and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. You will hear a voice prompt saying “Phone pairing”. 2. Se...

1. Motorcycles
2. 10C

You can remove the external microphone and the speakers from the 10C and record videos without them. If you remove the external microphone and the external speakers then the 10C will switch to reco...

1. Cycling & Outdoor
2. PRISM / PRISM LITE

The rubber pieces on the Suction Cup Mount for the Prism will turn white if they are left out in wet weather after a certain amount of time. What you can do to fix this is to place the rubber piece...

1. Motorcycles
2. SMH10

To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-of...

1. Cycling & Outdoor
2. PRISM / PRISM LITE

1. Motorcycles
2. SMH10

Sena provides Cigarette Charger and optional DC Power Charger with USB power cable for charging SMH10. Also, any certified USB power charger from other manufacturers can be used to charge the SMH10...

1. Cycling & Outdoor
2. PRISM / PRISM LITE

1. Motorcycles
2. SMH10

You can check the battery level in two different ways when the headset is powering on.  LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 ...

1. Motorcycles
2. SMH10

You can listen to voice instruction from Bluetooth GPS navigation. Some GPS systems use mobile phone profile (HFP, Hands-Free Profile) and others use stereo music profile (A2DP, Advanced Audio Dist...