Sena

1. Cycling & Outdoor
2. PRISM / PRISM LITE

The rubber pieces on the Suction Cup Mount for the Prism will turn white if they are left out in wet weather after a certain amount of time. What you can do to fix this is to place the rubber piece...

1. Motorcycles
2. SMH10

To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-of...

1. Cycling & Outdoor
2. PRISM / PRISM LITE

1. Motorcycles
2. SMH10

Sena provides Cigarette Charger and optional DC Power Charger with USB power cable for charging SMH10. Also, any certified USB power charger from other manufacturers can be used to charge the SMH10...

1. Cycling & Outdoor
2. PRISM / PRISM LITE

1. Motorcycles
2. SMH10

You can check the battery level in two different ways when the headset is powering on.  LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 ...

1. Motorcycles
2. SMH10

You can listen to voice instruction from Bluetooth GPS navigation. Some GPS systems use mobile phone profile (HFP, Hands-Free Profile) and others use stereo music profile (A2DP, Advanced Audio Dist...

1. Motorcycles
2. SMH10

You (A) can have a three-way conference intercom with two other SMH10 friends (B & C) by establishing two intercom connections at the same time. While a three-way conference intercom is in progress...

1. Motorcycles
2. SMH10

Start Four-Way Intercom You can have four-way conference intercom with three other SMH10 users by adding one more intercom participant to the three-way intercom. While you are having three-way inte...

1. Motorcycles
2. SMH10

1. To restore the SMH10 to factory default settings, press and hold the Phone Button for 12 seconds until the LED shows solid red and you hear double beeps. You will hear a voice prompt saying “Fac...