Robert Beglau

1. Community
2. Feature Requests and Suggestions
3. Let SMH-10 have 2 A2DP pairings at same time

From Sena - May 17, 2012... "Thank you for your suggestion. We are already doing the feasibility of applying the multipoint with A2DP and HFP as well with the next SMH10 firmware. We will keep you...

1. Community
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Bob-  I agree that the SR10 should be taking care of this. Refplusten-  Thanks for your research and additional info with the link for the isolated power supply.  It definitely looks like a viable ...

1. Community
2. Feature Requests and Suggestions
3. Be able to modify the pairing code (by software)

Ricky- Your information is both informative and insightful.  Thanks for taking the time to do the write up.  I think where the sticking point is in this matter is that you are only able to connect ...

1. Community
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

I agree Peter.  Although my set up is not quite as complex as yours sounds, I have wired all devices up to bike power, including the SR10, and was quite frustrated when trying to eliminate the "noi...

1. Community
2. Feature Requests and Suggestions
3. Be able to modify the pairing code (by software)

Indeed.  It is impossible to pair the widely used Garmin motorcycle GPSs as a phone (HFP).  This is purely caused by the incompatibility of the pairing codes.  I like the suggestion of being able t...

1. Community
2. Feature Requests and Suggestions
3. Let SMH-10 have 2 A2DP pairings at same time

Yes, multi-point A2DP pairing would be greatly appreciated on the SMH-10, or maybe even adding an A2DP pairing feature to SR10.  The Zumo 660 does not play nice with the Sena, if multiple devices a...