Rafal

1. Community
2. Feature Requests and Suggestions
3. Cannot connect to server

If you want, you can look for information regarding updating the USB drivers, but that didn't help in my case. If you didn't make a mistake when connecting the helmet and you didn't turn it ON (R1...

1. Community
2. General Discussion
3. Disappointing distortion and quietness

One more thing you can check: restart mesh on both devices. Sometimes the Sena ST1 had this affliction that it would break the connection, after a reset it would fix itself. You can even reset the...

1. Community
2. Feature Requests and Suggestions
3. WAVE Intercom App 50R

At the weekend we tested the Sena Wave with the 50S and 50C intercoms.After switching on the Wave, despite the short distance between us, we were unable to talk. All transmission was via the cellul...

1. Community
2. General Discussion
3. Disappointing distortion and quietness

During my experience of using SENA intercoms, word clipping, distortion and dropped calls were caused by a folded antenna on one of the intercoms. Both intercoms must have a raised antenna. 

1. Community
2. General Discussion
3. R1 Evo

Sena R1 EVO has only MESH intercom The Sena C1 has a bluetoot intercom only. It is not possible to connect the two. My personal advice: replace the C1 helmet with one that has mesh. Mesh works bett...

1. Community
2. Feature Requests and Suggestions
3. Cannot connect to server

The first thing to check is the USB-C cable. You are probably using a non-original one. Unfortunately, not every USB cable works properly. The second thing, turn off / disconnect wireless devices l...