Pairing the RC3 (3-button remote) with a 10C

1. Turn on the 10C and the RC3.

2. Press the Jog Dial for 10 seconds to enter the configuration menu. Rotate the Jog Dial until you hear a voice prompt saying, "Remote control pairing". Press the Phone Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps.

3. On the RC3, press the (+) Button for 8 seconds until its LED flashes red. The 10C will automatically perform pairing with the RC3 in pairing mode. You will hear a voice prompt, "Remote control connected" when they are successfully connected.

Have more questions? Submit a request


Article is closed for comments.