Phone Pairing

There are three ways to pair the phone.

Initially Pairing the ACS-RAM

The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:

• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.

1. Press and hold the Center Button and the (+) Button for 1 second.

2. Select ACS-RAM in the list of Bluetooth devices detected. If your mobile phone asks for a PIN, enter 0000.

Pairing When the ACS-RAM is Turned Off

1. While the headset is off, press and hold the (+) Button and the
(-) Button until the LED flashes red and blue alternately and you hear
a voice prompt, “Phone pairing.”

2. Select ACS-RAM in the list of Bluetooth devices detected. If your mobile phone asks for a PIN, enter 0000.

Pairing When the ACS-RAM is Turned On

1. While the headset is on, press and hold the Center Button for 10 seconds.

2. Tap the (+) Button.

3. Select ACS-RAM in the list of Bluetooth devices detected. If your mobile phone asks for a PIN, enter 0000.