Initially Pairing the Bluetooth system
The Bluetooth system will automatically enter the phone
pairing mode when you initially turn on the Bluetooth
system or in the following situations:
• Rebooting after executing the Factory Reset; or
• Rebooting after executing the Delete All Pairings.
1. Press and hold the Center Button and the (+) Button
for 1 second. You will hear a voice prompt, “Phone
pairing”.
2. With your mobile phone in Bluetooth-pairing mode,
select Sena OUTRUSH R in the list of devices
detected.
3. If your mobile phone asks for a PIN, enter 0000.
0 Comments