new firmware for HJC smart 50B (Sena 50r)
Good afternoon everyone. I was trying to update HJC Smart 50B which is Sena 50R. But it didn't work out for me. Meanwhile, for Sena 50R the firmware number is already 2.4, while for HJC Smart 50B it remains 1.0. When will the latest firmware for HJC Smart 50B be available?
-
Kind of sad that I now only know of this due to it being posted here in the forums after e-mailing HJC and Sena multiple times
0 -
Alright, trying to update it now, already running into issues on that front, random USB Disconnects, tried multiple cables and ports by now.
Sometimes it goes out at 20%, the best one I got by now was 35%, what a mess0 -
Nie masz żadnych problemów taki jest cykl aktualizacji że rozłącza. Ja już skończyłem drugi kask aktualizować i właśnie tak się to dzieje.
0 -
I did the upgrade today without any problems...
0 -
Last time I used a USB2.0 connection without issues. USB3.0 or higher seems unstable, or so I hear.
0 -
I got the FW Updated and went through what actually changed, so far it's just the same as FW 2.6 on the 50R, meaning no "proper" Wave intercom support (as in dynamically switching from Mesh to Wave and back)
Here are the Changelogs for V2.6
- Added Mesh 3.0
- Reduced the volume of music during Mesh Intercom when Audio Overlay Volume Management is enabled
- Removed the firmware version number from device name
- Minor bug fix with not hearing voice prompts when changing Mesh Intercom channels quickly through the Smart HJC App
0 -
It's normal for the device to disconnect and reconnect during the update process. The progress bar isn't very reliable, so just be patient until the update is complete. Mine stopped at 73% but still finished successfully.
0 -
Hello, when will the firmware updates be available for HJC 50b and Schuberth SC2?
Indeed, the Sena models have upgraded to Mesh 3.0, while the HJC and Schuberth are still on Mesh 2.0.----------------------------------------------------
Bonjour, à quand les mises à jour firmware pour HJC 50b et SCHUBERTH SC2 ?
En effet, les Sena ne sont pas0 -
If you're on FW2.6 on the 50B, you need to enable mesh 3.0 in the HJC app
0 -
50B there is no MESH3 option because the HJC update is not out yet (vers 1.0) i wait 2.6
0 -
But it IS out now. The V2.6 version is available and contains the Mesh3.0 function. After updating, the Mesh3.0 toggle is available in the HJC app.
0 -
Updated to v. 2.6 no problem
I can see the toggle switch in the app for mesh 3.0 but cannot turn it on
Tried with mesh enabled and still won't turn on.
Any ideas0 -
Looks like do have an app update available though from a while ago, so will try again tomorrow when I get time
0 -
That's probably it. I already have the latest version of the app and can toggle the switch with firmware v2.6.
It can be set, even when Mesh is not turned on yet. Turning it back off will revert back to Mesh 2.0.
1 -
Every device has to use 3.0, it's not backwards compatible
If you switch in the app, restart your 50B
0 -
I have two intercoms in mine after the update the Mesh 3.0 button works and in my wife's the button is there but I can't switch it. Resetting the intercom didn't help.
0 -
Yep the app update sorted not being able to flick the switch to on.
0 -
I checked my wife's phone and there is an update, I've already done it, when I get home I'll check if I can turn on Mesh 3.0, I hope so. Thank you
1 -
Many thanks, the app update worked, Mesh 3.0 is running, the connection between the two helmets works.
1
Please sign in to leave a comment.
Comments
109 comments