Red Leader
- Total activity 66
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 9
- Subscriptions 23
Activity overview
Latest activity by Red Leader-
Red Leader commented,
After any factory reset (through the menu) and any firmware changes, be sure to tap the reset button located above the info sticker (model, serial #) to the left of the screw, with a paperclip.
-
Red Leader commented,
Oh that's nice they're making it metal now! Good to see that they're improving the design from feedback. I wonder if you could use a hot soldering iron with a small piece of abs or lego, melt a gob...
-
Red Leader commented,
I'm pretty sure I recall it being different with the old firmware. In any case, we need that option for sure!
-
Red Leader commented,
Susan, Have you tried connecting your iPhone to your Nav VI, then connect your Nav VI to your 20S? Not sure if the Nav VI will adjust the music when it gives directions but if it does, there's your...
-
Red Leader commented,
That'a good point. You'd probably need France French, New Brunswick French, and Québec French options because they all sound really different.
-
Red Leader commented,
It could be a poor connection between the Headset Main Unit (20S) and the Universal Helmet Clamp. Make sure the pins and connectors are clean and are in good contact. You can usually tell if the cr...
-
Red Leader commented,
Drücken Sie die Reset-Taste. Zurück von 20S. Benutze die Nadel.
-
Red Leader commented,
Try the SR10 coupled to a two-way radio - PIT guy has the two-way radio, the drivers have a SR10+two-way radio. Or, for one-way communication, equip all drivers with two-way radios plugged into the...
-
Red Leader commented,
Try hitting the reset button - requires a thin paperclip or needle. See "Fault Reset" in your 20S manual for details. Other thing too is to check your 20S is firmly contacting the pins on your Uni...
-
Red Leader commented,
After you do a firmware change, do the factory reset, AND then press that reset button (need a needle or thin paperclip) on the Headset Main Unit (see "Fault Reset" in the manual). Usually I'll ha...