mbz
- Total activity 31
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 15
Activity overview
Latest activity by mbz-
mbz commented,
Gaj, Have you tried the pin reset at the back of the SMH10? You could also try the firmware restore (your old firmware)
-
mbz commented,
Karen, I don't use the intercom because I ride solo. Do you ride in the same bike or separate bikes? And do you have the antenna up or down on the 20S?
-
mbz commented,
You actually don't need to upgrade/update your SMH5. Out of the box it is ready to use. I only update my headsets when my riding season is over in case something like this happens.
-
mbz commented,
SMH10 users: To toggle music sharing press and hold the Jog Dial for 2 second or until you hear a double beep, to start/stop music sharing during an intercom.
-
mbz commented,
Typically, the Nav app will use the A2DP channel to give the direction. If you can play music from your phone and hear it in the Sena headset you should hear the Nav app direction. I would also add...
-
mbz commented,
Hi, This is typical of GPS and bluetooth headset. When there's no audio coming from the GPS that Bluetooth channel closes between the GPS and headset. And when the GPS sends an audio to the headset...
-
mbz commented,
phone reception? If you're looking to update your Sena device go to http://senabluetooth.com/support/pre_download_document.php You will need to register first to get in.
-
mbz commented,
Jeremy & Noel, try the reset button at the back of the smh5. It's the tiny hole where you can use a paper clip to press it in. hopefully this wake up the device.
-
mbz commented,
Hey Guys, Can you provide a wiring diagram to get the Sena open ended cable connected to the CT-M11 for use with FTM-10R/FTM-10SR? Thanks.
-
mbz commented,
Hi Ed, I don't think it matters now. What matters is which device (iPhone or SM10) connects to your SMH10 first. If the iPhone connects first, it will take the A2DP channel and you won't hear the S...