beans
- Total activity 122
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 50
Comments
Recent activity by beans-
Dart451, If you look at the user guide, "Hello Sena" only works when the 20S is in standby mode. When your 20S is playing music it is no longer in standby.
-
You cannot use the Westone Bluetooth as a replacement to the 20S speakers. What you do is pair your Westone Bluetooth directly with your phone instead if you just want to listen to music.
-
Make sure you are pressing the correct button on the 20S when trying to pair with your phone. Use the smaller button on the side on the 20S. Do you hear the 20S say "Phone pairing" and does the LED...
-
Ged, At 98% it is done doing the firmware update. You can unplug it and turn it on. If it turns on perform a factory reset, delete the previous pairing in your phone, and re do the pairing. To pair...
-
At 98% the firmware is done writing to the 20S. If it stops, this means that the 20S is not able to reboot itself back up. To recover from this you can hit the reset button located at the back of t...
-
Check the cig charger's fuse. You can unscrew the tip of the charger (the end that plugs in to your bike).
-
Hello, You have to use the cigarette charger that came with the Freewire. This charger works with the bike's ignition.
-
Hi Franck, The SMH10R is not the same as the new 10R. I know this model naming is confusing to all (sigh). The 10R is a newer model. The Sena utility app is not compatible with the SMH10R nor the X...
-
I have updated to v1.7 recently, and I'm able to listen to the FM tuner. I can hear the voice prompts when you power on/off. Make sure that your volume is all the way up - rotate the volume wheel c...
-
You need the latest firmware on the 10S for it to support the FW. If you go to the link below you will see in the firmware history that they added support for Freewire http://www.sena.com/category/...