Ken Thompson
New user of Sena products, just like many of you here.
- Total activity 42
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 9
- Subscriptions 14
Activity overview
Latest activity by Ken Thompson-
Ken Thompson commented,
Desensitize the VOX system - turn off VOX Intercom & VOX Phone & disable Smart Volume Control.
-
Ken Thompson commented,
NOTE: Not a Sena rep, but... Try "VOX Intercom" off and "smart volume control" to off. The first issue (wind noise) may well be interfering with your second problem (unable to hear shared music vi...
-
Ken Thompson created a post,
Sena Headset Voice Commands & DJI Osmo Cameras
Just wondering if there might be the chance of getting any of the latest Sena Headset Communicator voice commands functional with any of the Osmo Action series of cameras?Yes, I realize I need to a...
-
Ken Thompson commented,
Not a Sena employee... The hardware limitations, along with the Bluetooth version implemented with those devices, will not allow for your use case to be viable. Sena provided me with a very lengthy...
-
Ken Thompson commented,
¡Gracias por la actualización del software la versión 2.7! La estoy instalando en mis auriculares mientras escribo esto.
-
Ken Thompson commented,
"Version 2.7 has already been released, which repairs the damage that 2.6 did in the 50s... Thanks Sena" ¡Gracias por la actualización del software! La estoy instalando en mis auriculares mientras ...
-
Ken Thompson commented,
The device itself can't connect directly to WiFi, but rather thru the iOS or Andriod phone app. Has that been attempted?
-
Ken Thompson commented,
I have purchased 15" long IEM wires for my use (Mee Audio MX1), but also use a short extension cable for this very reason. The helmet clamp base is where a ~12" long straight 3.5mm male connector i...
-
Ken Thompson commented,
If things are configured properly in the 50S, then, yes, your Mesh connection will be reestablished.
-
Ken Thompson commented,
If you have the Sena app, make sure all users are in the correct Mesh mode (2 vs. 3) as they are not compatible.